Flickr Home Page: https://www.flickr.com/photos/alanklein2000/albums
I checked my 4x5 holder vs the medium format holder. The medium format holder has one less hole, the one by itself on the 4x5 is not there on the medium format. Maybe the sensor or light going through isn't working. That could account for the medium format strip scan. Try the 35mm slide holder to see if you get the correct scan selection. It has that extra on the 4x5 and only 2 of the 3 of the others. If the extra isn;t working, you should get some strange result.
Flickr Home Page: https://www.flickr.com/photos/alanklein2000/albums
Coding: see picture. The hole on the right might not be working. If not, the 4x5 holder would work as a 120 holder. Try the 35mm holder to see what you get. You don't need slides I don't think to test.
Flickr Home Page: https://www.flickr.com/photos/alanklein2000/albums
Flickr Home Page: https://www.flickr.com/photos/alanklein2000/albums
Target Size is being set automatically, I've tried changing it but it always changes itself back. I can't find a setting to disable this. I assume it's getting that from the dot codes but I'm not sure.
And the negative settings are because I'm a dumbass and misread some notch codes in the dark bag, so a sheet of Portra went in my Stearman tank with a bunch of HP5+ and got developed in Ilfotec DD-X.
Bookmarks