rayfor
4-May-2024, 08:02
https://www.printables.com/model/860152-mutex-tech-dev-lite-largeformat-develop-drum
https://youtu.be/eW_ijePxz08
There are not too much OS dev drum on the web. After purchasing all the product line of jobo, I create this project to help every one get a drum out of a 3d printer. This drum is similar to jobo 2800 series but using the cup structure so it could be printed water sealed. You might need almost no extra material than filaments.
The drum is ready to use with a cpe/cpp/cpa lift or any plane you can roll it on. It takes only 130ml chemical to dev 4x 4x5 color sheet film or 200ml for B&W.
I've tested it with E6, D76, D67. STEP files are provided so anyone could do modification on it.
Open to commercial use as long as you could provdie a fair price for beginners.
https://youtu.be/eW_ijePxz08
There are not too much OS dev drum on the web. After purchasing all the product line of jobo, I create this project to help every one get a drum out of a 3d printer. This drum is similar to jobo 2800 series but using the cup structure so it could be printed water sealed. You might need almost no extra material than filaments.
The drum is ready to use with a cpe/cpp/cpa lift or any plane you can roll it on. It takes only 130ml chemical to dev 4x 4x5 color sheet film or 200ml for B&W.
I've tested it with E6, D76, D67. STEP files are provided so anyone could do modification on it.
Open to commercial use as long as you could provdie a fair price for beginners.